$9.95 flat rate shipping Australia-wide, free on orders over $1,000

Why Choose the Normcore 58.5mm Spring-Loaded Tamper V4 Titanium Ripple?

Tamping by hand is hard to repeat. A little too light and water finds gaps in the puck, and a little too firm slows the flow unevenly. This Normcore coffee tamper uses a calibrated spring to remove that variation. Press down until the spring compresses fully and you have applied the same pressure as your last shot. That consistency makes it easier to dial in your grinder and to tell whether a change in taste came from your grind, dose or technique.

How Does a Spring-Loaded Coffee Tamper Work?

A calibrated spring sits inside the handle. As you press the tamper into the portafilter, the spring compresses and the handle drops to a set point, which tells you the target pressure has been reached. A central guide shaft keeps the base level throughout, so the puck stays flat and evenly packed. Three interchangeable springs are included:

  • 5kg for lighter tamping pressure
  • 10kg (pre-installed) for a dependable, all-round setting
  • 15kg for firmer tamping pressure

Swapping springs is quick, so you can fine-tune the tamper to your beans, basket and preferred technique.

Titanium PVD Ripple Base: Less Puck Suction, Smoother Extraction

The titanium PVD-coated ripple base is what sets this tamper apart. The grooved surface helps reduce puck suction, so the base lifts away cleanly, and it promotes more even water dispersion through the puck for cleaner, more uniform extractions. The PVD finish adds non-stick durability and resists corrosion, so the base stays smooth and easy to wipe clean after use.

Is This the Best Coffee Tamper for 58.5mm Baskets?

If you use a 58.5mm precision basket, a close fit matters. A tamper that is too small leaves gaps around the edge of the puck, and one that is too large will not seat properly. This 58.5mm size is made for 58.3mm to 58.5mm precision baskets. It is not intended for standard 58mm baskets, so measure your basket before ordering.

Normcore Coffee Accessories to Complete Your Setup

Pair this tamper with other Normcore coffee accessories, such as a puck screen, tamping mat station or distribution tool, for a consistent workflow from dose to extraction.

You may also like

More Coffee Tampers & Tamping Mats

View all →

Why Prestige Coffee

Why buy from Prestige?

Authorised Normcore dealer

Full manufacturer's warranty, with genuine Australian stock and parts.

Why buy from an authorised dealer?

Lifetime setup and support

Every coffee machine and grinder we sell comes with lifetime setup and support, wherever you are in Australia. We'll help you get set up, dial in your first coffees and answer questions for as long as you own it.

Backed by an Australia-wide service network

Our in-house coffee technicians bring over 50 years of combined experience, backed by a service network across every state. Warranty or out-of-warranty, you're looked after by people who know your machine.

Free shipping on orders over $1,000

We ship Australia-wide, with flat-rate $9.95 shipping on smaller orders.

Questions before you buy? Call our team on (08) 8352 2022.